- Heim
- Anycubic Photon Mono 2
Normaler Preis €159,00
Normaler Preis €219,00 Verkaufspreis €159,00
Grundpreis / pro
-€60,00
Versand wird beim Checkout berechnet
Produktmerkmale
● Größer und höhere Auflösung: 6,6-Zoll-4K+ LCD-Bildschirm
● Größeres Druckvolumen: 165 x 89 x 143 mm (LWH)
● Verbesserte LightTurbo Matrix, weniger Linien
🔥 Schulanfangsverkauf: Ab €144
🔥 €15 Rabatt auf Bestellungen über €99, Code: BS15
🔥 €20 Rabatt auf Bestellungen über €200, Code: BS20
Verfügbarkeit für Abholungen konnte nicht geladen werden
Lieferzeit: 15. bis 20. März
Kostenloser Expressversand
14-Tage Rückgaberecht Ohne Angabe Von Gründen
30-Tage-Kundendienst-Garantie
Ein-Jahres-Garantie für 3D-Drucker
100% Sichere Bezahlung
Normaler Preis €159,00
Normaler Preis €219,00 Verkaufspreis €159,00
nur Photon Mono 2 / ohne / ohne
- nur Photon Mono 2 / ohne / ohne
- nur Photon Mono 2 / ohne / + AirPure
- nur Photon Mono 2 / ohne / + Reinigungsset
- nur Photon Mono 2 / + 1kg Harz / ohne
- nur Photon Mono 2 / + 1kg Harz / + AirPure
- nur Photon Mono 2 / + 1kg Harz / + Reinigungsset
- nur Photon Mono 2 / + 2kg Harz / ohne
- nur Photon Mono 2 / + 2kg Harz / + AirPure
- nur Photon Mono 2 / + 2kg Harz / + Reinigungsset
- nur Photon Mono 2 / + 3kg Harz / ohne
- nur Photon Mono 2 / + 3kg Harz / + AirPure
- nur Photon Mono 2 / + 3kg Harz / + Reinigungsset
- nur Photon Mono 2 / + 5kg Harz / ohne
- nur Photon Mono 2 / + 5kg Harz / + AirPure
- nur Photon Mono 2 / + 5kg Harz / + Reinigungsset
Eigenschaften Spezifikation Was ist in der Box Bewertungen FAQs
6,6-Zoll-4K+-LCD-Bildschirm | 2,09L Druckvolumen lÜberarbeitete LighTurbo-Matrix
Größere und höhere Auflösung
Anycubic Photon Mono 2 verwendet einen 6,6-Zoll-Monochrom-LCD-Bildschirm mit einer Auflösung von 4096*2560, der die winzigen Details der Modelle anzeigen kann.
Der Photon Mono 2 3D-Drucker bietet eine Druckgröße von 165x89x143mm (HWD) und ein maximales Druckvolumen von 2,09L mit hoher Genauigkeit, was ihn zu einer präzisen Wahl für Kreative macht.
Photon Workshop 3.0
Die neue Version des Slicers verbessert das Schneiden, Stanzen, Hinzufügen von Stützen, Extrahieren von Schalen und die Modellanordnung. Ein optimierter Prozess und eine benutzerfreundliche Benutzeroberfläche verbessern die Bedienung.
Der Photon Mono 2 3D-Drucker bietet eine Druckgröße von 165x89x143mm (HWD) und ein maximales Druckvolumen von 2,09L mit hoher Genauigkeit, was ihn zu einer präzisen Wahl für Kreative macht.
Photon Workshop 3.0
Die neue Version des Slicers verbessert das Schneiden, Stanzen, Hinzufügen von Stützen, Extrahieren von Schalen und die Modellanordnung. Ein optimierter Prozess und eine benutzerfreundliche Benutzeroberfläche verbessern die Bedienung.
Die verbesserte LighTurbo-Matrix sorgt für stabiles, gleichmäßiges Licht, reduziert Schichtlinien und eliminiert Gitterlinien. Photon Mono 2 rendert lebendige Modelldetails mit feinen, glatten Oberflächen.
Lasergravierte Bauplatte
Die lasergravierte Plattform des Photon Mono 2 gewährleistet eine hervorragende Ebenheit, verbessert die Modellhaftung und erhöht den Druckerfolg. Verhindert, dass das Modell herunterfällt und sich verzieht.
Die verbesserte LighTurbo-Matrix sorgt für stabiles, gleichmäßiges Licht, reduziert Schichtlinien und eliminiert Gitterlinien. Photon Mono 2 rendert lebendige Modelldetails mit feinen, glatten Oberflächen.
Lasergravierte Bauplatte
Die lasergravierte Plattform des Photon Mono 2 gewährleistet eine hervorragende Ebenheit, verbessert die Modellhaftung und erhöht den Druckerfolg. Verhindert, dass das Modell herunterfällt und sich verzieht.
Video
Modell Druck
Spezifikation
Tech specs
Build volume
165x89x143mm(HWD)
Printing volume
2.09L/73.5oz.
Printing speed
≤50mm/hr
Machine leveling
Manuelle 4-Punkt-Nivellierung
Lcd screen size
6,6" 4K+(4.096 x 2.560px) Mono-LCD
Light source
Parallele Matrix-Upgrade-Lichtquelle
Build platform
Lasergravur einer Aluminiumlegierung
Operating screen
2,8" TFT-Touch-Bedienung
Slicing software
Photon Workshop
Material
Unterstützt die meisten auf dem Markt erhältlichen Harze (wasserabwaschbar, Standard, ABS-ähnlich, auf Pflanzenbasis usw.)
Machine dimensions
390x229x235mm(HWD)
Machine weight
4kg/8.8lb.
Packliste
-
Photon Mono 2
-
Druckplattform
-
Harzbottich
-
Abstreifer
-
Bildschirmschutz-Kit
-
USB-Stick
-
Netzadapter
-
Handschuhe
-
Trichter
-
Gebrauchsanweisung
-
Werkzeugsatz
-
Maske
-
Nivellierpapier
Erfahren Sie mehr über Photon Mono 2
FAQs
Wie hoch sind die Leistungsabgabe und der Energieverbrauch des Netzteils des Photon Mono 2?
Die Ausgangsleistung des Photon Mono 2 beträgt 24 V und 2,5 A und sein Energieverbrauch beträgt 60 W.
Wie erhalte ich weitere Informationen zu Mono 2?
Weitere Informationen zum Photon Mono 2 finden Sie im Anycubic Wiki.
Wo kann ich die Slicer-Software herunterladen?
Bitte besuchen Sie , um die Slicing-Software herunterzuladen.
Welche Hardware wird zum Reinigen und Aushärten gedruckter Teile mit einem Drucker benötigt?
A: Um gedruckte Teile mit einem Drucker zu reinigen und auszuhärten, benötigen Sie ein Reinigungsset und eine .
Wie wäre es, herauszufinden, welche Harze dieses Gerät unterstützt und wo die Harzeinstellungen für diesen 3D-Drucker zu finden sind?
A: Informationen zu den Harzeinstellungen finden Sie unter: Harzeinstellungen für Anycubic 3D-Drucker.
Tage
Std
Protokoll
Sekunden